Caterpillar 3054C Piston | Genuine OEM Precision Component
Part Numbers: 225-5437 (STD), 508-1898, 233-7232 |
Engine: 3054C (4.4L, 4?cylinder inline diesel) |
Emissions: EPA Tier 2 / EU Stage II |
Power Range: 52–97 bkW (69.7–130 bhp)
Product Overview
The Caterpillar 3054C piston is a precision?engineered core component for the 3054C industrial diesel engine, purpose?built for heavy?duty construction, agricultural, material handling, and power generation equipment. Designed to OEM factory tolerances, it delivers exceptional durability, combustion efficiency, and reliability under extreme operating conditions, ensuring maximum uptime and compliance with global emission standards.
Design & Engineering Features
Material & Construction
- High?Strength Cast Aluminum Alloy: Premium alloy with advanced thermal?resistant crown treatment to withstand peak combustion temperatures up to 180 bar.
- Low?Friction Skirt Coating: Graphite/molybdenum composite coating minimizes scuffing and wear, reducing friction losses and extending service life.
- Precision?Machined Combustion Bowl: Optimized geometry (55.21 mm diameter, 22 mm depth) promotes superior air?fuel mixing, reduces emissions, and controls combustion noise.
- Floating Piston Pin: 38.10 mm (1.500 in) diameter pin with spiral lock/snap?ring retention for minimal friction and secure connection to the connecting rod.
- No Standard Cooling Gallery: Base design (225?5437) balances weight, cost, and performance for mid?range power applications.
Ring Pack Configuration (3?Ring System)
- Top Compression Ring: Taper?faced, molybdenum?coated (T 3.5 Mo P) – primary cylinder pressure sealing, wear?resistant.
- Second Compression Ring: Scraper design (M 2.5 IFU P) – secondary sealing and enhanced oil control.
- Oil Control Ring: Segmented with expander spring (DSF 3.5 Cr P) – efficient oil return to crankcase, preventing oil consumption.
Technical Specifications
| Parameter |
Standard Value |
Metric/Imperial |
| Cylinder Bore |
105 mm |
4.134 in Cat |
| Piston Diameter (STD) |
104.89 mm |
– |
| Piston?to?Liner Clearance |
~0.11 mm |
– |
| Compression Height |
70.12 mm |
– |
| Overall Length |
108.05 mm |
– |
| Compression Ratio |
16.2:1 |
–Cat |
| Piston Pin Diameter |
38.10 mm |
1.500 in |
| Weight (Piston + Rings + Pin) |
2.08 kg |
4.59 lb |
| Piston Protrusion Above Deck |
+0.38 to +0.51 mm |
+0.015 to +0.020 in |
| Rated Operating Speed |
2000–2400 rpm |
– |
| Peak Torque Speed |
1400 rpm |
– |
| Max Combustion Pressure |
~180 bar |
– |
| Top Ring Gap (New Liners) |
0.35–0.75 mm |
0.014–0.030 in |
Compatibility
Engine Serial Numbers & Arrangements
- 3054C: ESN 3341 and above
- Arrangement Numbers: 176?3172, 176?3180, 177?9752, 178?9011, 179?1795, 188?5099, 188?5100, 194?9477, 207?1097, 207?1098, 207?1099, 207?1100, 207?1103, 207?1175, 213?0296, 219?7590, 219?7591, 223?6467, 223?6511, 223?7570, 227?4805
Equipment Applications
- Wheel Loaders: Cat 914G
- Wheeled Excavators: M313C, M315C
- Generator Sets: C4.4, C4.4DE55E2, C4.4DE65E3, C4.4DE88E0, C4.4DE88E3, XQP100
- Compactors: CB?534D, CB?564D, CD?54, CP?433E, CP?533E, CS?433E, CS?533E, PF?300C, PS?150C, PS?300C, PS?360C
- Backhoe Loaders: 414E, 416E, 416F
Installation & Service Guidelines
Pre?Installation Preparation
- Inspect cylinder liners for scoring, wear, or cracks; replace if out of tolerance.
- Clean all components thoroughly to remove debris and contaminants.
- Heat piston to 60–80°C for easy floating pin installation (avoid overheating to prevent material damage).
Installation Requirements
- Verify ring end gaps and ensure correct orientation (top ring marked “TOP” must face upward).
- Follow Caterpillar torque specifications for connecting rod bolts and cylinder head fasteners to prevent misalignment and premature wear.
- Use only genuine Cat or approved lubricants during assembly.
Maintenance Recommendations
- Use Cat DEO CJ?4 or equivalent high?quality engine oil.
- Perform regular oil and air filter changes to prevent abrasive wear.
- Monitor engine blow?by, oil consumption, and compression; replace piston rings during in?frame overhaul if issues are detected.
Package Options
- Genuine Cat Piston Kit: Piston + rings + pin + retainers (225?5437, 508?1898)
- Oversize Kits: 0.50 mm (.020 in), 1.00 mm (.040 in) oversizes available (288?1394, 288?1395)
- Engine Overhaul Kits: Complete sets including pistons, liners, bearings, gaskets, and valves for 3054C/C4.4 engines
Quality & Warranty
- OEM?Grade Precision: Manufactured to Caterpillar’s strict factory specifications for perfect fit and performance.
- Durability Testing: Subjected to rigorous thermal, mechanical, and endurance testing to ensure reliability in harsh environments.
- Warranty: Genuine Cat parts backed by Caterpillar’s standard warranty; aftermarket options available with manufacturer warranties
Packaging & Supply
- Packaging: CAT genuine anti?corrosion, shock?proof packaging with foam inserts
- MOQ: 1 piece
- Shipping Ports: Global CAT distribution centers (e.g., Qingdao China)
- Delivery: Sea freight, air freight, express courier (DHL, FedEx)
- Warranty: CAT standard parts warranty (12 months from installation)
Why Choose Caterpillar 3054C Piston?
- Unmatched Reliability: Proven performance in the most demanding industrial applications.
- Optimal Efficiency: Precision design maximizes fuel efficiency and minimizes emissions.
- Long Service Life: High?quality materials and engineering reduce maintenance costs and downtime.
- Genuine OEM Assurance: Direct replacement for original equipment, ensuring compatibility and performance.
Engine parts
